Sartorius DCU 3, Operator'S Handbook Manual

Page: 77 / 150

Operators Handbook DCU3 – System
7., Main function „Batch Control“
BAEDCU3 - Rev. 4.6 - 0504 7 - 3
7.2.2 Operating Display „Automatic Sequential Control“
Note: This example is only valid for BIOSTAT
®
ED:
Tag Entry Displayed value or function, required input
STATE Enter the sterilization program mode „start“ or „stop“
start
−
start sterilization
stop
−
stop sterilization
step
−
not allowed (only valid for single step controls)
Display of the status of the sterilization program:
active
−
sterilization program running
lock
−
start is impossible since another sequence or recipe is active
inactive
−
sterilization program inactive
ACK Request for „Acknowledgement-display“, see „alarm messages“ in
the supplement
PHASE Display of the sterilization step
----
−
sterilization program inactive
HEAT
−
heating to sterilization temperature
STERI
−
control of sterilization temperature
COOL1
−
cooling to 80 degC
COOL2
−
cooling from 80 degC to process temperature
READY
−
process temperature reached (message: „sterilization finished“)
TEMP Display of the current fermentor temperature
ELAPS Display of elapsed sterilization time in the sterilization phase
STEMP Input of sterilization temperature
FTEMP Input of fermentor (process) temperature
STIME Input of sterilization time