Sartorius DCU 3, Operator'S Handbook Manual

Page: 104 / 150

Operators Handbook DCU3 – System
9., Main function „Maintenance“
BAEDCU3 - Rev. 4.6 - 0504 9 - 16
9.12 System Settings
The maintenance function „System Parameter“ can be used for general settings of the DCU - system,
such as setting the internal clock.
9.12.1 Operating Display
Tag Entry Displayed value or function, required input
BEEPER Switching the beeper „on“ and „off“
enable beeper „on“
disable beeper „off“
FAILTIME h:m Input of power failure time (FAILTIME) in [hours:minutes]
for system behavior after restart. The system will behave
as follows:
−
power failure < FAILTIME: system continuous with the
last settings
−
power failure > FAILTIME: systems returns to default
settings
DATE dd.mm.yyyy Input of current date, formate is [day.month.year]
TIME hh:mm:ss Input of current time, formate is [hours:minutes:seconds]
SYSTEM RESET Reset of the entire DCU - system:
−
This function deletes all user-defined settings and en-
ables the default settings available on delivery.