Sartorius DCU 3, Operator'S Handbook Manual

Page: 86 / 150

Operators Handbook DCU3 – System
8., Main Function „Recipes“
BAEDCU3 - Rev. 4.6 - 0504 8 - 6
8.6 Process Value Alarms in Recipes
You can specify the upper and lower alarm limits and the alarm status for each process variable in a
recipe. All inputs must be made as described in chapter
6.23 , Alarm Limits of Process Values.
If the recipes should not influence the alarm monitoring for certain process variables, the alarm state
must be set to „no change“ while entering the corresponding recipe.
8.6.1 Operating Display
Tag Entry Displayed value or function, required input
ALARM MODE Additional input of state for alarm monitoring in the recipe
----- (no change): recipe does not effect the alarm limit monitoring
8.6.2 Special Notes
Process variables which should not be affected by the recipe, must be set to the state „no
change“ when entering the recipe.