The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
+1 215.322.6063 P.
+1 215.322.8498 F.
www.sapling-inc.com
11
IMPORTANT
: Detach clock from power source before installing new circuitry. DO NOT add new circuitry while the clock is
operating.
Attach the end of the Temperature Sensor Wire to the circuit board in the following manner:
Temperature Sensor Wiring (Optional)
If you ordered a Temperature Sensor with your SBP 3200/3300 clock, it must be connected to a terminal on the circuit board located on the back
of the clock.
Connecting The Temperature Sensor
Temperature Sensor
Sensor Cable
Data from the temperature sensor will be sent to your clock when the
clock is powered on. For more information on how to make the SBP
display temperature, please see the section labeled “Web Interface -
Display Settings”.
The Sensor Cable is 6 feet (1.83 meters) long, and so the sensor
should be positioned within 6 feet of the clock. The cable is
unshielded, 4 conductor, 22AWG (.33mm²). If longer than 6 feet is
required, the wire would have to be terminated in an electrical box,
and the longer wire would have to be provided by the customer.
1
2
3
4
5
5) No connection
4) White
3) Black
2) Green
1) Red
W
iri
ng
In
for
m
at
ion
