manualshive.com logo in svg

Sanyo VPC-MZ2, Instruction Manual, Page: 94 / 208

Share
Download
Sanyo VPC-MZ2 Instruction Manual Download Page 94

SX215/EX, U (VPC-MZ2 GB)  Mon. March 25/2002

USING THE VARIOUS PLAYBACK FUNCTIONS 

HINT 

œ 

The maximum degree of magnification will depend on the resolution of the 
original image. 

œ 

The maximum magnification for 

Ó

 resolution is about 31 times. 

œ 

If the image has been rotated, it will be returned to its original orientation 
and then enlarged. 

œ 

One scene (still image) of a video clip can be enlarged; however, a video 
clip cannot be played while enlarged. 

HINT 
The magnified portion of the image can be saved as a separate image. 

œ 

Press the shutter release button. The magnified portion is saved as a new 
still image. 

To magnify the image from the Playback Setting Screen 

1 

Display the Playback Setting Screen (see page 39). 

2 

Select the zoom icon 

O

, and press the SET button. 

English

 91 

Summary of Contents for VPC-MZ2

















































































































































































































Reviews:

No comments