manualshive.com logo in svg

Sanyo VPC-MZ2, Instruction Manual, Page: 29 / 208

Share
Download
Sanyo VPC-MZ2 Instruction Manual Download Page 29

Install the batteries and card

The card can be used after it has been formatted with the camera (see
“FORMATTING A CARD” on page 35). Be sure to turn off the power before
installing or removing the card.

Use the batteries recharged in step 1 above.

Make sure the polarity ((+) and (–)) of the batteries is as indicated in the
battery compartment, and that the card is oriented correctly.

3

Insert the batteries

1 Open battery compartment cover on the digital

camera bottom.

2 Insert the batteries.
3 Close the battery compartment cover.
4 Push the cover in the direction shown by the

arrow.

4

Insert the card

1 Open the card slot cover.
2 Insert the card all the way.
3 Fold down the eject button.
4 Close the card slot cover.

Card
slot
cover

Eject
button

SX215/EX, U (VPC-MZ2 GB)  Mon. March 25/2002

English

 26

Summary of Contents for VPC-MZ2

















































































































































































































Reviews:

No comments