manualshive.com logo in svg

Sanyo VPC-MZ2, Instruction Manual, Page: 140 / 208

Share
Download
Sanyo VPC-MZ2 Instruction Manual Download Page 140

COMBINING IMAGES (ADD PHOTO FUNCTION)

4

Press the SET button.

œ

Crosshairs (white lines) for setting
the size of the superimposed image
appear.

œ

If the image was rotated, it will be
returned to its original orientation.

 

Determine the size of the superimposed
image

At this time the size of the superimposed
photo (frame) is determined. The frame is
created by specifying its upper left corner
(start point) and lower right corner (end
point). The position of the frame is
determined after this.

 

5

Press the arrow button to specify
the start point.
[

j

] and [

l

] buttons:

Move the horizontal crosshair up
and down.

[

d

] and [

c

] buttons:

Move the vertical crosshair left and
right.

œ

If the arrow button is held down, the
crosshair moves in continuous
steps. Release the arrow button and
the crosshair stops moving.

 

    START POINT SETTING

Start point

End point

Start point

SX215/EX, U (VPC-MZ2 GB)  Mon. March 25/2002

English

 137

Summary of Contents for VPC-MZ2

















































































































































































































Reviews:

No comments