manualshive.com logo in svg

Sanyo VPC-MZ2, Instruction Manual, Page: 137 / 208

Share
Download
Sanyo VPC-MZ2 Instruction Manual Download Page 137

5

Press the SET button.

œ

Voice memo recording starts. Talk
into the microphone on the digital
camera.

œ

The sound will be recorded for
about 4 seconds.

œ

While the voice memo is being
recorded, RECORDING and 

K

are displayed.

œ

When recording is finished, you are
returned to the Edit Photo Screen.

œ

For images with a voice memo
added, the volume icon 

N

 is

shown on the Playback Setting
Screen.

HINT

œ

You can also add a voice memo immediately after capturing an image (see
page 77).

œ

After a voice memo has been added to an image, you cannot erase only
the voice memo. When the image is erased, the attached voice memo is
also erased.

œ

If a voice memo is added to an image that already has a voice memo, the
new recording will replace the previous one.

Microphone

    

ADD AUDIO

      R E C O R D I N G

REC (recording) indicator

SX215/EX, U (VPC-MZ2 GB)  Mon. March 25/2002

English

 134

Summary of Contents for VPC-MZ2

















































































































































































































Reviews:

No comments