Sanyo VPC-MZ2, Instruction Manual, Page: 73 / 208

4
Press [
j
] or [
l
] on the arrow button
to select the recording icon
æ
,
and press the SET button.
œ
Recording begins. Point the
microphone toward the sound you
wish to record.
œ
K
(recording) appears on the LCD
monitor during recording.
5
End the audio recording.
œ
Press the SET button once more to
end the recording. You are returned
to the Audio Recording Screen.
œ
When the remaining recording time
is approximately less than 30
seconds, a countdown of the
remaining recording time is shown.
œ
To return to the Shooting Option
Setting Screen, in the Audio
Recording Screen mode, press the
MODE button, or select the
C
icon and press the SET button.
HINT
œ
For more information about the remaining recording time, please see page
201.
You can perform an audio recording even after turning off the Audio
Recording Screen
œ
After displaying the Audio Recording Screen and
æ
is selected (step 4),
you can set the main switch to MONITOR OFF to put the digital camera
into the audio recording standby mode. In this condition, just press the SET
button to start recording. Or, after turning on the power to the digital
camera, if you set the selector dial to
P
, even when the LCD monitor is
off, you can press the SET button to start recording.
Microphone
AUDIO REC 00:08
R E C O R D I N G
STOP
Recording time (min:sec)
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
70