Sanyo VPC-MZ2 Instruction Manual Download Page 90

Page: 90 / 208

SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002

LISTENING TO AUDIO RECORDINGS

Set the digital camera to the audio recording playback mode (see
page 81).

The Audio Recording Playback
Screen for the selected audio
recording appears.

Turn the jog dial to select the
desired audio recording, and press
the SET button.

PLAY

PROTECT
ERARSE
VOLUME

02:21

100-0008

2.2MB

2002.08.29

AUDIO

Select the audio playback icon

and press the SET button.

Playback starts.

To pause playback

Press the SET button to interrupt
playback; press it again to continue
playback.

00:15

100-0008

2.2MB

2002.08.29

AUDIO

PLAYBACK

STOP

To fast forward or rewind

Fast forward: During playback, press [

Rewind: During playback, press [

* The audio will not be heard.

If [

] is pressed during fast forward or rewind, playback will start.

To adjust the volume

From the Audio Recording Playback Screen, select the volume icon

Press [

] or [

], or turn the jog dial, to adjust the volume.

To select a different audio recording

On the Audio Recording Playback Screen in step 2, turn the jog dial.

To stop playback

During playback, press [

] or [

]. Playback will stop, and you are

returned to the Audio Recording Playback Screen.

English

Summary of Contents for VPC-MZ2

















































































































































































































Search results

Summary of Contents for VPC-MZ2

Reviews:

Related manuals for VPC-MZ2

Brands by name

Popular brands

Sanyo VPC-MZ2, Instruction Manual

Search results

Summary of Contents for VPC-MZ2

Reviews:

Related manuals for VPC-MZ2

Brands by name

Popular brands