Sanyo VPC-MZ2, Instruction Manual, Page: 104 / 208

SETTING THE EXPOSURE CONTROL
<Manual exposure control
Í
>
œ
The display to set the aperture size
and shutter speed appears.
œ
Press [
j
] or [
l
] on the arrow button
to select aperture size
\
or shutter
speed
ä
, and turn the jog dial to
change the setting.
Setting range:
Aperture
\
: 2.8 to 8.0 (Wide)
4.8 to 13.0 (Tele)
Shutter speed
ä
: 16 sec. to
1/1000 sec.
4
Press the SET button.
œ
This completes the exposure control setting.
œ
You are returned to the Shooting Setting Screen.
HINT
œ
When using a slow shutter setting, use a tripod or the like to stabilize the
digital camera.
œ
When manual exposure control is selected, the exposure correction value
becomes
±
0 and exposure correction cannot be performed.
œ
If the aperture value is set to F10 or higher, the resolution of the shot
picture may be slightly reduced.
If the shutter speed does not change to 1/1000...
œ
In some cases the shutter speed cannot be set to 1/1000 sec. even when
manual exposure control
Í
is selected and the jog dial is turned. If this
happens make the aperture small.
MANUAL
13
SETTING
8.0
1/30
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
101