Sanyo PLC-XM100, Owner'S Manual

Page: 124 / 149

35
ENGLISH
System
This function is to select the system of signal
input to the projector. The available system
mode are listed on the pull-down menu but-
ton according to the input signal. Select a
system and then click
Set button.
Control
If the mode (Mode1 to Mode10, ExMode11 to ExMode60) which is stored in the item "PC
Adjustment" (
p.38) is available, they are also listed together with the above mode.
Available selection at the RGB(PC analog) input
Item Description
XGA1 ........................It automatically switches to the proper computer sys-
tem of the input signal.
* The computer system modes (VGA, SVGA, XGA. SXGA,
UXGA, WXGA...) which meet the input signal are listed.
Available selection at the RGB(PC digital) input
Item Description
D-XGA ......................It automatically switches to the proper computer sys-
tem of the input signal.
* The computer system modes (D-VGA, D-SVGA, D-XGA.
D-SXGA1...) which meet the input signal are listed.
Available selection at the RGB(AV HDCP) input
Item Description
D-480p ....................It automatically switches to the proper scanning system
of the input signal.
* The selectable scanning systems are D-480p, D-575p,
D-720p, D-1035i and D-1080i.
Available selection at the Video/S-video/Scart input
Item Description
AUTO ........................It automatically switches to the proper color system of
the input signal.
* The selectable color systems are PAL, SECAM, NTSC,
NTSC4.43, PAL-M and PAL-N.
* AUTO is fixed at the Scart input.
Available selection at the Component input
Item Description
AUTO ........................It automatically switches to the proper scanning system
of the input signal.
* The selectable scanning systems are 480i, 575i, 480p,
575p, 720p, 1035i, 1080i and 1080p.