Sanyo PLC-XM100, Owner'S Manual

Page: 36 / 149

36
Computer Input
System SVGA 1
Input 1 RGB(PC analog)
Input 2 RGB
Input 3 Video
PC System Menu
PC System Menu
1
2
PC system can also be selected manually.
The PC System Menu
Selected system is
displayed.
Press the MENU button to display the On-Screen Menu. Use
WKH3RLQWŸźEXWWRQVWRVHOHFW Input and then press the Point
ŹRUWKH6(/(&7EXWWRQ
8VHWKH3RLQWŸźEXWWRQVWRVHOHFW Systerm and then press
WKH3RLQWŹRUWKH6(/(&7EXWWRQ
8VHWKH3RLQWŸźEXWWRQVWRVHOHFWWKHGHVLUHGV\VWHPDQG
then press the SELECT button.
3
Systems in this dialog box
can be selected.
Customized Mode (1-10) set in
the PC adjust Menu (pp.38-39).
This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a
computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper
image without any additional settings. (Signal formats provided in this projector are shown on pages 79-80)
One of the following messages may appear when:
The projector cannot recognize the connected signal
conforming to the provided PC Systems.
Auto is
displayed on the System Menu box and the Auto PC
adjustment function works to display proper images.
If the image is not projected properly, a manual
adjustment is required (pp.38-39).
There is no signal input from the computer. Check the
connection between your computer and the projector.
(See “Troubleshooting” on pp.70-72.)
Auto
-----
The preset system is manually adjusted in the PC
adjust Menu. The adjusted data can be stored in
Mode
1-10 (pp.38-39).
Mode 1
PC Systems provided in this projector is chosen. The
projector chooses a proper system provided in the
projector and displays it.
SVGA 1
* Mode 1 and SVGA 1 are examples.
Computer System Selection
Automatic Multi-Scan System
Selecting Computer System Manually