Sanyo PLC-XM100 Owner'S Manual Download Page 132

Page: 132 / 149

ENGLISH

Indication of the lamp status

Icon display/background

Status

White/Blue

Lamp on (Normal)

White/Red

Lamp on (Lamp is being used over a specified use time, replace lamp
immediately)

Gray/Blue

Lamp off (Normal)

Gray/Red

Lamp off (Lamp is being used over a specified use time, replace lamp
immediately)

Red/Blue with X

Lamp failure (Lamp failure, check lamp condition)

Red/Red with X

Lamp failure (Lamp failure and lamp is being used over a specified use
time, replace lamp immediately)

Icon display/background

Status

Blue

Good condition.

Yellow/Gray

Filter is almost clogged.

Red/Gray

Filter is clogged. Replace a filter with new one.
* When the projector cannot decode the return from the filter cartridge,

this icon also appears.

Indication of the filter status

Information

Summary of Contents for PLC-XM100






















































































































































Search results

Summary of Contents for PLC-XM100

Reviews:

Related manuals for PLC-XM100

Brands by name

Popular brands

Sanyo PLC-XM100, Owner'S Manual

Search results

Summary of Contents for PLC-XM100

Reviews:

Related manuals for PLC-XM100

Brands by name

Popular brands