Sanyo PLC-XM100, Owner'S Manual

Page: 26 / 149

26
Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 73-75.
M
N
O
P
Q
R
S
T
Main Menu
Sub-Menu
U
V
O
Image select
For computer source, used to select an image level among Standard , Real , and Image 1-10 (p.40).
For Video source, used to select an image level among Standard , Cinema , and Image 1-10 (p.46).
P
Image adjust
For computer source, used to adjust the computer image. [ Contrast / Brightness / Color temp. / White balance (R/G/B) /
Offset(R/G/B) / Sharpness / Gamma/Reset / Store ] (pp.41-42).
For Video source, used to adjust the video image. [ Contrast / Brightness / Color/Tint / Color temp. / White balance (R/G/
B) / Offset (R/G/B) / Sharpness / Gamma / Noise Reduction / Progressive/Reset / Store ] (pp.47-48).
N
PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
Q
Screen
For computer source, used to adjust the size of the image. [ Normal / True / Wide / Full / Custom / Digital zoom +/- / Keystone /
Ceiling / Rear / Reset ] (pp.42-44).
For Video source, used to adjust the size of the image. [ Normal / Wide / Custom / Keystone / Ceiling / Rear / Reset ] (pp. 49-
50).
M Input
Used to select an input source ( Input 1 , Input 2 , Input 3 or Network ) (p.33).
Note : Network will be not displayed when optional PJ-Net Organizer is not attached.
R
Sound
Used to adjust the volume or mute the sound (p.28).
T Information
Display the input source information: Input , H-sync freq. , V-sync freq. , Screen , Language , Lamp status , Lamp counter ,
Filter counter , Power management , Key lock , PIN code lock , Shutter management , Simple mode , Remote control ,
and SERIAL NO. (p.29).
V
Guide
The key operation is displayed.
S
Setting
Used to set the projector’s operating configurations (pp.51-62).
U
Network
See the owner’s manual of “Network Set-up and Operation”.
Menu Bar