SY265C LC/SY265C LR Excavator OMM
SANY
Operation and Maintenance Manual — 0420
3-25
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
USB Input
Use the USB input (1) to insert a USB device (memory and other electronics) to be read/played in the device.
When a USB device is plugged into the USB input, press the SRC button to toggle between the USB port and the
radio.
NOTE:
MP3 and WMA audio files, USB 1.1 format, and FAT16/FAT32 files are supported.
Auto Scan/Preset Station (AS/PS) Button
Use the AS/PS button (2) to begin the automatic scan (AS) feature through the preset stations (PS), or to
automatically load the preset station buttons.
Press and release the AS/PS button once to begin the auto scan feature. Each preset station will play for 10 seconds
with the station frequency blinking on the LCD (6). Press the AS/PS button once more to remain on the current
station.
Press and hold the AS/PS button for 2 seconds to activate the auto programming feature. In auto programming, the
six radio stations with the strongest signals are stored in the six preset station buttons (10–15).
AM/FM Selector Button
Press the AM/FM selector button (3) to toggle between AM and FM bands.
Audio Selector (SEL) Button
Press and release the audio selector (SEL) button (4) to toggle between the USB input and the radio.
Press and hold the SEL button to access the bass level adjustment.
Press the button again to access the treble adjustment.
Press the button once more to adjust the balance (between the in-cab speakers).
When a sound mode setting is selected, use the VOL + and – buttons (8) to adjust the level for the selected setting.
NOTE:
The current radio station frequency displays if the button is not pressed within 5 seconds.
Time Button
Press the TIME button (5) to display the local time for 5 seconds. The display reverts to the current station after 5
seconds. Set the current time by holding the button and using the tuning buttons to change the displayed time.
Liquid Crystal Display (LCD)
The radio band (AM or FM), the currently tuned radio station frequency, the preset station number, and the current
time are shown on the liquid crystal display (LCD) (6).
Summary of Contents for SY265C LC
Page 2: ...Page Intentionally Blank ...
Page 287: ...Page Intentionally Blank ...
