SY265C LC/SY265C LR Excavator OMM
4-48
Operation and Maintenance Manual — 0420
SANY
BUCKET
Replace the Bucket Teeth
NOTE:
Bucket teeth must be replaced before the bucket tooth adapter (not shown) wears out.
1. Prepare the machine for service. See “Maintenance
2. Turn the battery disconnect switch to the OFF position.
See “Battery Disconnect Switch” on page 3-20.
3. Select a stable work surface. Move the hydraulic
controls to the neutral position. Keep the bottom of the
bucket level on a wooden block (1).
4. Remove the roll pins (2) and worn bucket teeth (3).
WARNING!
• Unexpected machine movement can be dangerous when replacing the bucket teeth. Place
the bucket on a stable work surface. Shut down the engine and lock out the control levers.
• Roll pins may eject with extreme force when removed. Do not allow anyone to stand in front
of the pins during pin removal.
• Metal fragments from roll pins and tolls may break off during roll pin removal and
installation. Wear safety goggles, gloves, and other personal protective equipment (PPE) to
prevent serious injury.
Failure to follow these warnings could result in death or serious injury.
Fig. 4-67
0002350
1
Fig. 4-68
0002351
3
2
Summary of Contents for SY265C LC
Page 2: ...Page Intentionally Blank ...
Page 287: ...Page Intentionally Blank ...
