SY265C LC/SY265C LR Excavator OMM
SANY
Operation and Maintenance Manual — 0420
5-45
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
6. Remove the bottom access panel (3).
7. Place an appropriately sized container under the
radiator drain hose (4). For engine coolant capacity, see
“Capacities” on page 5-14.
8. Open the radiator drain valve (5).
9. Allow the engine coolant to completely drain into the
container.
10. When the engine cooling system is empty, close the
radiator drain valve.
11. Add new engine coolant through the expansion tank
until the engine coolant level reaches the bottom of the
filler neck.
12. Install the expansion tank cap.
13. Start the engine and run it at low idle for several minutes to allow engine coolant to circulate.
14. Shut down the engine, then check the engine coolant level. See “Check the Engine Coolant Level” on page 5-
20.
15. Install the bottom access cover.
16. Close the engine cover.
NOTICE!
Dispose of drained engine coolant in
accordance with local environmental
regulations. Failure to do so could
damage the environment.
Fig. 5-46
3
Fig. 5-47
4
5
Summary of Contents for SY265C LC
Page 2: ...Page Intentionally Blank ...
Page 287: ...Page Intentionally Blank ...
