− 5 −
3. CONNECTING THE FOOT PEDAL
①
Install the pedal base to the machine frame with
screws
❷
.
②
Connect pedal bases
A
and
B
with two screws
❶
.
Position of the pedal can be optionally
adjusted within the range of the slot.
③
Connect the connecting rods with fixing screw
❸
.
1. When connecting, do not connect the
rods with connecting rod
C
on the
sensor side pulled downward,
2. Install so that connecting rod on the
pedal side
D
and the caster
❹
do not
interfere with each other within the
range of pedal operation.
4. CONNECTING THE AIR COUPLER
Connect one end of air coupler
A
supplied with
the machine as an accessory to air hose
❷
. Then
connect the other end to coupler
❸
on the main unit
side.
• Connect coupler
A
to the main unit
with air cock
❶
closed, then carefully
open air cock
❶
to allow the com-
pressed air to be supplied.
• Make sure that the pressure gauge of
the regulator reads 0.5 MPa.
CAUTION
:
When installing the pedal, perform the work paying attention to the overhead table.
❶
A
❸
❷
❶
❶
A
B
❷
❸
C
D
❹
