SanDisk APW-895N/IP-420 Instruction Manual Download Page 84

Page: 84 / 125

− 80 −

15. USING THE INFORMATION

There are three functions below, in the information function.

Ⓐ

Maintenance inspection information

Oil replacement (grease-up) time, needle replacement time,
cleaning time, etc. are specified, and when the specified
time has passed, the warning notice can be performed.

See

"VI-15.(1) Observing the maintenance inspection

information" p. 81

Ⓑ

Production control information

By means of function to display target production and
actual production, the target achieving consciousness of a

line or a group is enhanced and also the progress can be

confirmed in one glance.

See

"VI-15.(3) Observing the production control

information" p. 83

and

"VI-15.(4) Performing setting

of the production control information" p. 85

Ⓒ

Operation measurement information

Information on machine operating situation, machine op-

erating rate, pitch time, machine time, and machine speed

can be displayed.

See

"VI-15.(5) Observing the operation measurement

information" p. 87

①

Display the information screen

Press INFORMATION key

of the switch seat section in

the input screen and the information screen (screen A) is dis-
played.

Information screen

(screen A)

Ⓒ

Ⓐ

Ⓑ

Summary of Contents for APW-895N/IP-420






























































































































Search results

Summary of Contents for APW-895N/IP-420

Reviews:

Related manuals for APW-895N/IP-420

Brands by name

Popular brands

SanDisk APW-895N/IP-420, Instruction Manual

Search results

Summary of Contents for APW-895N/IP-420

Reviews:

Related manuals for APW-895N/IP-420

Brands by name

Popular brands