![background image](http://html2.mh-extra.com/html/sandisk/apw-895n-ip-420/apw-895n-ip-420_instruction-manual_4643768056.webp)
− 52 −
(2) Sewing data list
①
Items that are displayed in the data input screen
※
. . . Item that is not displayed due to other setting state
No.
Item
Setting range
/
Edit unit
Initial value
Motion mode change-over
With/without of motion of sewing machine motor, center knife and corner
knife is selected.
- - -
Cloth feed mode
Cloth feed, sewing
machine thread trimming
and center knife mode
Cloth feed, sewing ma-
chine thread trimming
Cloth feed, sewing machine
thread trimming, center
knife and corner knife mode
Sewing mode change-over
Sewing mode is selected.
* In case of alternate sewing, flap priority sewing is set with
.
- - -
L size sewing
Left flap sewing
Right flap sewing
Flap priority sewing
L size setting
In case of L size sewing, the sewing length is set.
* It is possible to set only when setting L size sewing
.
* For the long and wide type, it is possible to set up to 250 mm.
(However, it is possible to set up to 300 mm without corner knife.)
18.0 to
220.0
/
0.1mm
150.0mm
※
Marking light irradiation position change-over
Sewing start irradiation/sewing end irradiation/center irradiation is selected.
- - -
Sewing start irradiation
Sewing end irradiation
Center irradiation
Flap concealed stitching data (Left sewing start)
Position of sewing start of left-hand flap is adjusted.
* It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm
※
Flap concealed stitching data (Left sewing end)
Position of sewing end of left-hand flap is adjusted.
* It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm
※
Flap concealed stitching data (Right sewing start)
Position of sewing start of right-hand flap is adjusted.
* It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm
※