![background image](http://html2.mh-extra.com/html/sandisk/apw-895n-ip-420/apw-895n-ip-420_instruction-manual_4643768006.webp)
− 2 −
II. CONFIGURATION OF THE MACHINE
The APW-895N consists mainly of the following units.
A
Frame and structural components (Framesewing table, covers, foot switch, etc.)
B
Clamp foot unit and feed mechanism
C
Corner knife unit
D
Binder unit (Binder components and its driving components)
E
Pneumatic control unit (Pneumatic control devices and pipings)
F
Stacker unit (Optional)
G
Sewing machine head
H
Electric control unit (Control panel)
I
Operation panel
J
Power switch (Also used as the emergency stop switch)
K
Temporary stop switch
With this machine consisting of the aforementioned 11 units, you can do desired welting work simply by set-
ting materials (garment body, interlining piece, welting patch, etc.) in place and operating the switches on the
operation panel.
In addition, when temporary stop switch
K
is pressed during operation of the device, the device stops.
D
K
I
B
A
J
F
E
G
H
C