![background image](http://html2.mh-extra.com/html/sandisk/apw-895n-ip-420/apw-895n-ip-420_instruction-manual_4643768068.webp)
− 64 −
No.
Item
Setting range
/
Edit unit
Initial value
Condensation/back tack detailed setting
Detailed setting “Perform/Not perform” of pitch of condensation/back
tack section is selected.
- - -
Perform
Not perform
Flap stopper position
In case of flap sewing, sewing start irradiation position of marking light
(distance from needle)is set
* Setting is only the irradiation position of marking light. Actual sewing
position is the flap end position detected by the flap sensor.
80.0 to
280.0
/
0.1mm
80.0mm
Stacker timer 5
Sets the waiting time of the stacker from the start of material grasping
operation to the release of the material
This setting is available when
"Grasping stacker (optional)" is used.
0.00 - 9.99/
0.01 sec
1.00 sec
Stacker timer 6
Sets the duration of operating the oscillating arm
This setting is available when
"Grasping stacker (optional)" is used.
0.00 - 9.99/
0.01 sec
1.50 sec
Number of stitches of grease-up
Number of stitches of sewing machine motion after replenishing grease
is indicated.
* When pressing CLEAR button, number of stitches is cleared to “0”.
Be sure to clear after replenishing grease.
- - -
- - -
Language selection
Language to be indicated in the panel is selected.
- - -
No selection
Japanese
English
Chinese (traditional)
Chinese (simplified)
Spanish
Italian
French
German
Portuguese
Portuguese
Vietnamese
Korean
Indonesian
Russian
※
. . . Item that is not displayed due to other setting state