Sanako Lab 90 User Manual Download Page 61

Page: 61 / 79

Lab 90 Setup



8. In the

IP address

field, enter 172.24.1.1 and in the

Subnetmask

field, enter 255.255.255.248

9. Click

Note The following settings are needed only when a 3Com
Etherlink XL 10 network card is used:



For Duplex Mode, select Half Duplex.



For Media Type, set the value to 100Base Tx.

TO COMPLETE THE CONFIGURATION

Finally, to activate the settings, restart the computer.

TEACHER PC SOUND CARD MIXER SETTING

TO SET THE CD PLAYER LEVEL

Play a CD and listen to the level from the teacher headset.
Adjust if necessary.

TO SET THE WAVE LEVEL

Play a media file and listen to the level from the teacher
headset. Adjust to meet the CD player level.

TO SET THE MAIN VOLUME

Play a media file or CD and adjust the volume.

TO ADJUST THE AUDIO LEVEL IN THE SOURCE INTERFACE

The input level for the Source Interface is 150mV - 2V, which
you can set on the input level control on the Source Interface
device.

Note 2:

The names of the volume setting options may vary due to
differences between sound card types.

Summary of Contents for Lab 90
















































































Search results

Summary of Contents for Lab 90

Reviews:

Related manuals for Lab 90

Brands by name

Popular brands

Sanako Lab 90, User Manual

Search results

Summary of Contents for Lab 90

Reviews:

Related manuals for Lab 90

Brands by name

Popular brands