Samsung SRN-1000, User Manual

Page: 27 / 122

English _27
●
ST
Ar
Ting we
B viewer
ConneCTing weB viewer
1. Open your web browser and type the IP address or URL of
NVR into the URL address box.
M
`
“ 192.168.1.200 ” is set to IP by default.
`
Set to an available IP address in IP Installer or " Network >
Connection Mode ”.
`
The URL connection will be enabled only when the DDNS connection settings have been completed.
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
J
`
The initial administrator ID is “ admin ” and the password should be
set when logging in for the first time. (Initial password of the Admin
user is set to “ 4321 ”.)
`
ID allows alphanumeric characters only.
`
Password allows only alphanumeric letters and special characters other than < \ > and < " >.
`
Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
using the default wireless router password may expose your video data to potential threat.
`
Please change your password every three months to safely protect personal information and to prevent the damage of the
information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
M
`
It allow s up to 10 simultaneous access including the Admin and general users.
`
It does not allow multiple login of the Admin user.
`
Password of the Admin and general users can be changed in < Permission Management > menu of the NVR.
`
All settings are applied by the NVR’s settings.
3. Click < install Activex Control... >.
4. When the installation confirm message appear, click [ yes ]
button.