Samsung SRN-1000 User Manual Download Page 33

Page: 33 / 122

English

_33

●

Live viewer

Description

Capture

Saves current video for selected channel in designated path.

Prints current video image for selected channel through designated printer.

Save as AVI

Records the live video in AVI file format in designated path, and then stops recording.
Recording status icon is displayed on screen during recording.

Manual NVR Record

Manually activates and deactivates NVR recording.

PTZ

Controls connect PTZ camera(s).

OSD menu

Goes to the relevant menu screen of a camera, which supports OSD menu and changes the

menu.

Live Status

Displays corresponding live status of camea connected to each channel.

Record Status

Displays corresponding record status of each channel.

Display Pane

Displays the video of camera connected to NVR.

Shutdown

Exits currently connecting NVR remotely.
A confirmation pops up to check if you surely want to close the NVR.

Logout

Performs logout process.

Displays the connected user ID.

Summary of Contents for SRN-1000



























































































































Search results

Summary of Contents for SRN-1000

Reviews:

Related manuals for SRN-1000

Brands by name

Popular brands

Samsung SRN-1000, User Manual

Search results

Summary of Contents for SRN-1000

Reviews:

Related manuals for SRN-1000

Brands by name

Popular brands