Samsung SHR-4040P, User Manual, Page: 54 / 75

11-4
❿
Remote Site
Configure the connection list for remote access.
SHR SMART VIEWER
2
Functions of the SHR Admin
11-3
Local Setup Button
Initiates programming for the system operation and remote site configuration.
❿
System
Set up the date/time format for the SHR Smart Viewer, the modem connection
information for remote access, the system password, and display option.
●
Date/Time Format : Set the date/time format.
●
Dial-up Network : Select Use modem if you want to use the internal modem or an
external modem for remote access.
●
Security Options : Set up the password if password confirmation is required
Before setup, Before startup, or Before shutdown the SHR Smart Viewer. Click the
Change button to change the password. The password can be composed of up to
eight digits or alphabetic characters.
●
Display Option : Set up the display acceleration.
- None : Not using the display acceleration.
- Normal : Using the display acceleration (DirectX).
- Full : Using the display acceleration (DirectX Video Memory).
NOTE
NOTE
The image cannot be displayed properly, depending on the specification of your PC.
In this case, lower the level of the display option.
NOTE
NOTE
Up to 32 characters may be entered for the site name and telephone number, and
eight characters entered for the password.
●
Add : Click the Add button and enter the information of the remote site to register.
Enter a site name and the IP address of the remote site (modem phone number
for dial-up connection), acquired from your network administrator. If you have
entered a user ID and a password of the remote site for remote access, the site will
be connected automatically without a dialog box asking for a password.
SHR-4040P/ENG-2 7/24/03 10:26 AM Page 11-3