Samsung SHR-4040P, User Manual

Page: 13 / 75

Pin No. Pin Specification
1 CD (CARRIER DETECT)
2 RXD(RECEIVED DATA)
3 TXD(TRANSMITTED DATA)
4 DTR(DATA TERMINAL READY)
5 SG(SIGNAL GROUND)
6 DSR(DATA SET READY)
7 RTS(REQUEST TO SEND)
8 CTS(CLEAR TO SEND)
9 RI(RING INDICATOR)
2-2
You can control the system remotely through RS-232 parallel communication or Lan
by a PC.
(1) Connecting RS-232C
A. Communication Method
- Data Code : ASCII Code
- Protocol : 8 bit Data, 1 Stop bit, None Parity
- Transmission Speed : 4800, 9600, 19200, 38400, 57600 bps
B. RS-232C Port(D-SUB 9 Pin) and Pin Specification
DIGITAL IMAGE RECORDER
1
Connecting External Device
2-1
■
This device can be connected to such external device as an video signal input
camera, audio signal input microphone, and video/audio signal output monitor.
■
It can be also connected to such external device as an alarm at user’s request.
■
It can be connected to a PC through serial communication or LAN.
2
Connecting PC
VIDEO IN-THROUGH AV OUT AUDIO IN
ALARM IN 1 ALARM IN 2 ALARM IN 3 ALARM IN 4
GND
ALARM RESET IN
GND
ALARM OUT 1 ALARM OUT 2
GND
1 2 3 4
1 2
3 4
VIDEO S-VHS
NETWORK RS-232C
FACTORY
RESET
AUDIO
Caution
Caution
This device shall be combined with a monitor that is able to support the PAL video
signal. A general computer monitors is not applicable.
5 1
6 9
(2) Connecting LAN
You are able to monitor, search, and save video data with the Remote
Program(RAS).
Please refer to xx page about how to use RAS.
SHR-4040P/ENG-1 7/24/03 10:28 AM Page 2-1