Samsung SHR-4040P, User Manual

Page: 26 / 75

4-10
4) HDD Condition
This device can hold up to 4 HDDs.
It displays the condition of each HDD.
- GOOD : HDD is in normal operation.
- BAD : HDD is dead.
- NOT INSTALLED : HDD has not been installed.
5) Displays the MAC ADDRESS of the system.
➃ SYSTEM LOG
If you click SYSTEM LOG, the following window will pop up.
Up to 1000 log files created while the system is running will be displayed.
DIGITAL IMAGE RECORDER
6
SYSTEM SETUP
4-9
Here comes the initial status of the SYSTEM SETUP menu.
①
PASSWORD
Sets the system password. The password is composed of 4 digit number whose
default is 4321.
➁
PASSWORD LOCK
While it is set to ON, you will be always asked for the password that was preset in
the PASSWORD mode whenever you press the MENU button( ) or cancel
the record lock during recording. If you input a wrong password, you may make no
further progress. If it is set to OFF, you will not be asked for the above password by
all means. [ON/OFF]
➂ SYSTEM/DISK INFORMATION
If you click SYSTEM/DISK INFORMATION, the following window will pop up.
Displays the basic system condition.
1) VERSION
Displays the current S/W version.
2) DISK REMAIN
Displays free HDD space at the moment.
3) RECORDED
- FROM : The first recorded time of a file.
- TO : The last recorded time of a file.
Caution Caution
You shall always input the password to cancel REC LOCK.
SYSTEM SETUP
PASSWORD ********
PASSWORD LOCK ON
SYSTEM/DISK INFORMATION
SYSTEM LOG
CLEAR ALL DATA
DEFAULT SETUP
SYSTEM SHUTDOWN
œ❷ :MOVE :SELECT MENU:EXIT
SYSTEM/DISK INFORMATION
VERSION ver 1.00
DISK REMAIN 10.81GB/120.00GB
RECORDED FROM
TO
HDD1 120GB GOOD
HDD2 NOT INSTALLED
HDD3 NOT INSTALLED
HDD4 NOT INSTALLED
MAC ADDRESS 00:03:22:00:70:69
MENU:EXIT
SYSTEM LOG
94 2003-07-01 00:00:00 SYS START
95 2003-07-01 00:00:00 REC START
96 2003-07-01 00:00:00 REC END
97 2003-07-01 00:00:00 CALL FAIL
98 2003-07-01 00:00:00 REC START
99 2003-07-01 00:00:00 PB START
NUMBER: 99 /99
œ❷➛❿ :MOVE :SELECT MENU:EXIT
MENU
SHR-4040P/ENG-1 7/24/03 10:28 AM Page 4-9