Finisher
Service Manual
2-52
Samsung Electronics
2.3.4.2 Curl amount from Engine
(1) Allowance of curl : |A MAX| ≤12.7 mm (1/2”)
R ≥80 mm
(Guarantee feeding function, sensing)
(2) Standard condition of curl : |A MAX| ≤7 mm
R ≥40 mm
(Guarantee functions, performance, and reliability)
1) This curl condition insures the stacking performance.
2) Ignore any trouble due to the paper curl of the located the top position in the bunch of sheets without
stapled.
3) It is out of spec that paper curl increasing by the time passing.
<Curl measurement method >
Media : Test paper
Environment : Test environment
Method : Measure the curl of 10 sheets on the flat board (grass) immediately after printed out,
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
