manualshive.com logo in svg

Samsung SCX 6555N - MultiXpress Mono Multifunction, Service Manual

Share
Download
Samsung SCX 6555N - MultiXpress Mono Multifunction Service Manual Download Page 202

Alignment & Troubleshooting

Service Manual

4-102

Samsung Electronics

4.2.2 Solution

The following chart lists some conditions that may occur and the recommended solutions. Follow the 

suggested solutions until the problem is corrected. If the problem persists, please call for service.

4.2.2.1 Paper feeding problems

Condition

Suggested solutions

Paper is jammed during 
printing.

Clear the paper jam.

Paper sticks together.

•  Check the maximum paper capacity of the tray.
• Make sure that you are using the correct type of paper.
• Remove paper from the tray and flex or fan the paper.
• Humid conditions may cause some paper to stick together.

Multiple sheets of paper do 
not feed 

•  Different types of paper may be stacked in the tray. Load paper of only one 

type, size, and weight.

• If multiple sheets have caused a paper jam, clear the paper jam.

Paper does not feed into 
the machine. 

• Remove any obstructions from inside the machine.
•  Paper has not been loaded correctly. Remove paper from the tray and 

reload it correctly.

• There is too much paper in the tray. Remove excess paper from the tray.
•  The paper is too thick. Use only paper that meets the specifications 

required by the machine.

•  If an original does not feed into the machine, the DADF rubber pad may 

require to be replaced. .

The paper keeps jamming.

•  There is too much paper in the tray. Remove excess paper from the tray. If 

you are printing on special materials, use the multi-purpose tray.

•  An incorrect type of paper is being used. Use only paper that meets the 

specifications required by the machine.

•  There may be debris inside the machine. Open the front cover and remove 

the debris.

•  If an original does not feed into the machine, the DADF rubber pad may 

require to be replaced.

Transparencies stick 

together in the paper exit. 

Use only transparencies specifically designed for laser printers. Remove 
each transparency as it exits from the machine.

Envelopes skew or fail to 

feed correctly.

Ensure that the paper guides are against both sides of the envelopes.

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands