manualshive.com logo in svg

Samsung SCX 6555N - MultiXpress Mono Multifunction, Service Manual

Share
Download
Samsung SCX 6555N - MultiXpress Mono Multifunction Service Manual Download Page 153

Alignment & Troubleshooting

Service Manual

4-53

Samsung Electronics

Option 

Description

Print

You can print Network Configuration, PS3 Font List, PCL Font List 

and Schedule Jobs Report. Schedule Jobs Report shows the job list 

in pending, in delayed faxing or the Mailbox list as well.

Accounting 
Reports

Supplies
Information

You can print the amount of each category that your machine has 
printed so far.

Network Auth.
Log Report

It displays user login IDs and emails.

Usage Page
Report

You can print the report on the amount of printouts depending on the 
paper size and type.

Accounting
Report

Prints the report of printing out count for each login user.

Report

Configuration

Report

You can print a report on the machine’s overall configuration.

Fax Report

You can set to print the information of a fax reports.

•  Multi Send Report: When you fax to several destination, set this 

option to print a transmission report. On is to print every time you 

send a fax, the machine prints a confirmation report. With On-Error, 
only when the transmission error occurred, the report will be printed 

out.

•  Fax Send Report Appearance: You can select whether the image on 

the confirmation report shows or not.

•  Fax Sent/Received Report: The machine stores the logs on each 

transmission and prints out every 50 logs with this option On. It you 

select Off, the machine stores the logs but does not print.

•  Fax Send Report: The machine prints the confirmation report after 

each fax job, only when you send a fax to one destination.

E-mail

Confirmation

Report

The report shows the job of scanning and sending it via Scan
to Email.

•  On: The report is printed whether a job successfully completed or 

failed.

• Off: No report is printed after completing a job.
•  On-Error: Only in case of error occurrence, the machine prints the 

report.

Report
(Continue)

Scan to Server

Confirmation

The report shows the job of scanning and sending it via SMB
and FTP.

•  On: The report is printed whether a job successfully completed or 

failed.

• Off: No report is printed after completing a job.
•  On-Error: Only in case of error occurrence, the machine prints the 

report.

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands