Samsung SCX 6555N - MultiXpress Mono Multifunction Service Manual Download Page 144

Page: 144 / 362

Alignment & Troubleshooting

Service Manual

4-44

Samsung Electronics

4.1.6.3 General Settings

Before you get ready to using the machine, it is recommended to set up the machine parameters.

1. Press Machine Setup on the control panel.

2. Press Admin Setting. When the login message pops up, then enter password and press OK. (Factory

setting is 1111.)

3. Press the General tab.

Option

Description

Device Info

The sub-options available are Service Center Registration and Contact Info.
You may enter information on service center and purchasing point.

Date & Time

You can set the date and time.

Default Settings

• Default Window: Set the first window that will appear on the display screen

after turning on the machine or waking up from the Low Power Mode to

Sleep Mode. For example, if you select Fax as a default window, the first

window will be the Basic tab of the Fax feature. In case you want to show ID

Copy as a default window, you need to enable this feature in Default Option

previously.

• Default Option: Changes all the default values for copying, faxing, emailing,

scanning and paper at once.

Measurements

This option lets you change the measurement unit to use (mm or inch), and set

the numeric separation (comma or period).

Timers

The machine cancels a printing job if data does not be received in specific

time.

• System Timeout: The machine returns to the default value after certain time

the machine waits. You can set a time for maximum 10 minutes.

• Held Job Timeout: The machine holds a job for a specific time period. You

can set a time period for at least an hour.

Language

It allows you to change the language that appears on the touch screen.

Energy Saver

You can reduce energy consumption by setting these features. Energy Saver

has three options, first Low Power Mode to Sleep Mode turns off the scanner

lamp under the glass. And Power Save turns off all the fans within the machine
after a certain time. Standby to Low Power Mode turns off the fans within the
machine except a core fan for the fuser unit.

CÓPIA NÃO CONTROLADA

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction











































































































































































































































































































































































Search results

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction

Reviews:

Brands by name

Popular brands

Samsung SCX 6555N - MultiXpress Mono Multifunction, Service Manual

Search results

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction

Reviews:

Brands by name

Popular brands