manualshive.com logo in svg

Samsung SCX 6555N - MultiXpress Mono Multifunction, Service Manual

Share
Download
Samsung SCX 6555N - MultiXpress Mono Multifunction Service Manual Download Page 150

Alignment & Troubleshooting

Service Manual

4-50

Samsung Electronics

4.1.6.7 Authentication

This feature lets you control and lock all outgoing data, or change the password.

1. Press Machine Setup on the control panel.

2. Press Admin Setting. When the login message pops up, then enter password and press OK.

3. Press the Setup tab > Authentication.

Option 

Description

Authentication
Mode

Network
Accounting

It enables the authentication mode which can be used for Job 
Accounting Plug-in the SyncThru™ Web Admin Service.

Foreign Device 
Interface

When you install the optional FDI kit, select Foreign Device
Interface Configuration Setup to activate it.
•  Job Timer: If there is not enough credit, you can set the machine to 

cancel a job right away or wait a designated amount of time for a 
deposit.

•  Print Job Control: When it is enabled, the both computer printing and 

copying are possible since the credit remains. With Disable, only the 

copy printing job needs the credit. (which means a computer printing 
a report or a fax job needs no credits)

•  Inhibit Services: When no credit is left, the machine disables the 

copy job only with Copy Only. With All Services, scanning service 

and copy job are disabled.

Authentication 
Mode (Continue)
 

Foreign Device 
Interface 
(Continue)

•  Internal Credits: It is used when you cancel the job or when the 

job is cancelled by the device due to insufficient credits (coin) or 
is canceled by user’s request. If you select Enable, the machine 

deposits a credit equal to the number of sheets that did not print out 

correctly, then it prints next job for free (for the amount deposited). 
With Disable, even if you cancel the printing job, the machine 

includes jammed paper in the count and the cost of printing.

•  Image Counter: Depends on whether the machine counts blank 

white pages.

No 
Authentication 
Mode

It disables Authentication Mode.

Change Admin. Password

You can change the password for the Admin Setting authentication.

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands