manualshive.com logo in svg

Samsung SCX 6555N - MultiXpress Mono Multifunction, Service Manual

Share
Download
Samsung SCX 6555N - MultiXpress Mono Multifunction Service Manual Download Page 12

Precautions

Service Manual

1-4

Samsung Electronics

1.2.5 Disregarding this warning may cause bodily injury

(1)  Be careful with the high temperature part. 

The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser to 

cool down before disassembly.

(2)  Do not put finger or hair into the rotating parts.

 

When operating a printer, do not put hand or hair into the rotating parts (Paper feeding entrance, motor, 

fan, etc.). If do, you can get harm.

(3)  When you move the printer

     -  When transporting/installing the equipment, employ four persons and be sure to hold the positions as 

shown in the figure.

 

The equipment is quite heavy and weighs approximately 45 Kg (including consumables), therefore pay 

full attention when handling it.

     -  Be sure not to hold the movable parts or units (e.g. the control panel, DADF) when transporting the 

equipment.

     - Be sure to use a dedicated outlet with 110V/220Vpower input.

     - The equipment must be grounded for safety.

     -  Select a suitable place for installation. Avoid excessive heat, high humidity, dust, vibration and direct 

sunlight.

     - Provide proper ventilation since the equipment emits a slight amount of ozone.

     -  To insure adequate working space for the copying operation, keep a minimum clearance of 80cm (32

"

 

on the left, 80 cm (32”) on the right and 10 cm (4”) on the rear.

     - The equipment shall be installed near the socket outlet and shall be accessible.

     - Be sure to fix and plug in the power cable securely after the installation so that no one trips over it.

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands