manualshive.com logo in svg

Samsung SCX 6555N - MultiXpress Mono Multifunction, Service Manual

Share
Download
Samsung SCX 6555N - MultiXpress Mono Multifunction Service Manual Download Page 204

Alignment & Troubleshooting

Service Manual

4-104

Samsung Electronics

Condition

Possible cause

Suggested solutions

Half the page is 
blank.(continue)

The paper size and the paper 
size settings do not match. 

Ensure that the paper size in the printer driver 
settings matches the paper in the tray. 
Or, ensure that the paper size in the printer 
driver settings matches the paper selection in the 
software application settings you use.

The machine prints, 
but the text is 
wrong, garbled, or 
incomplete.

The printer cable is loose or 
defective.

Disconnect the printer cable and reconnect. 
Try a print job that you have already printed 
successfully. 
If possible, attach the cable and the machine 
to another computer and try a print job that you 
know works. Finally, try a new printer cable.

The wrong printer driver was 
selected. 

Check the application’s printer selection menu to 

ensure that your machine is selected.

The software application is 

malfunctioning.

Try printing a job from another application.

The operating system is 
malfunctioning. 

Exit Windows and reboot the computer. Turn the 
machine off and then back on again.

Pages print, but are 
blank.

The toner cartridge is defective 
or out of toner.

Redistribute the toner, if necessary.
If necessary, replace the toner cartridge.

The file may have blank pages.  Check the file to ensure that it does not contain 

blank pages.

Some parts, such as the 
controller or the board, may be 
defective.

The printer does 
not print PDF file 
correctly. Some parts 
of graphics, text, 

or illustrations are 

missing.

Incompatibility between the 
PDF file and the Acrobat 
products.

Printing the PDF file as an image may enable 
the file to print. Turn on Print As Image from the 
Acrobat printing options. 

Note: 

It Will take longer to print when you print a 

PDF file as an image.

Your machine has 
an odd smell during 
initial use.

The oil used to protect the 
fuser is evaporating.

After printing about 100 color pages, there will be 
no more smell. It is a temporary issue.

The print quality of 
photos is not good. 
Images are not clear.

The resolution of the photo is 

very low.

Reduce the photo size. If you increase the photo 
size in the software application, the resolution will 
be reduced.

The machine prints, 
but the text is 
wrong, garbled, or 
incomplete.

If you are under the DOS 
environment, the font setting 
for your machine may be set 
incorrectly.

Suggested solutions: Change the language 
setting.

Before printing, the 

machine emits vapor 

near the output tray.

Using damp paper can cause 
vapor during printing.

This is not a problem. Just keep printing.

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands