manualshive.com logo in svg

Samsung SCX 6555N - MultiXpress Mono Multifunction, Service Manual

Share
Download
Samsung SCX 6555N - MultiXpress Mono Multifunction Service Manual Download Page 206

Alignment & Troubleshooting

Service Manual

4-106

Samsung Electronics

Condition

Suggested solutions

Toner smear

• Clean the inside of the machine.
• Check the paper type and quality.
• Remove the drum and toner cartridge and then, install a new one.

Vertical repetitive 

defects

If marks repeatedly appear on the printed side of the page at even intervals:
•  The imaging unit may be damaged. If a repetitive mark occurs on the page, run a 

cleaning sheet through several times to clean the cartridge;  After the printout, if 
you still have the same problems, remove the imaging unit and then, install a new 
one.

•  Parts of the machine may have toner on them. If the defects occur on the back of 

the page, the problem will likely correct itself after a few more pages.

• The fusing assembly may be damaged.

Background scatter

Background scatter results from bits of toner randomly distributed on the printed 
page.
•  The paper may be too damp. Try printing with a different batch of paper. Do not 

open packages of paper until necessary so that the paper does not absorb too 
much moisture.

•  If background scatter occurs on an envelope, change the printing layout to avoid 

printing over areas that have overlapping seams on the reverse side.

 

Printing on seams can cause problems.

•  If background scatter covers the entire surface area of a printed page, adjust the 

print resolution through your software application or the printer properties.

Misformed 
characters

•  If characters are improperly formed and producing hollow images, the paper stock 

may be too slick. Try a different paper.

•  If characters are improperly formed and producing a wavy effect, the scanner unit 

may need service.

Page skew

• Ensure that the paper is loaded properly.
• Check the paper type and quality.
•  Ensure that the paper or other material is loaded correctly and the guides are not 

too tight or too loose against the paper stack.

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Summary of Contents for SCX 6555N - MultiXpress Mono Multifunction











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands