manualshive.com logo in svg

Samsung QND-6010R, User Manual, Page: 10 / 75

Share
Download
Samsung QND-6010R User Manual Download Page 10

overview

10_

 overview 

components

Item

Description

a

Power Port

Used to plug the power cable.

b

Alarm I/O Port

ARM-OUT

Used to connect the alarm output signal.

GND

These are common ports to connect alarm input/output signals.

ARM-IN

Used to connect the alarm input sensor or external day/night sensor.

c

Network Port

Used to connect the PoE or Ethernet cable for network connection.

d

Audio In Jack

Used to connect to a microphone.

CAUTION

:Be ware of the

Rated Voltage and Polarity

of the power connection.

a

b
c

d

at a GLance (Qno-6020r/6030r)

appearance

Item

Description

a

Micro SD card slot

(Internal space of the product) This is a slot in which you can insert a Micro SD card.

b

Reset Button

The button restores all camera settings to the factory default. 

Press and hold for about 5 seconds to reboot the system.

J

    

If you reset the camera, the network settings will be adjusted so that DHCP can be 

enabled. If there is no DHCP server in the network, you must run the IP Installer 

program to change the basic network settings such as IP address, Subnet mask, 

Gateway, etc., before you can connect to the network.

c

Sunshield Hold

It fixes the sunshield with the camera.

d

Sunshield

It protects the camera from the direct sunlight.

RESET

b

c

a

d

Summary of Contents for QND-6010R












































































Reviews:

No comments