Cleaning the cooktop seal
To clean the seal around the edges of the
glass, lay a wet cloth on it for a few minutes,
then wipe clean with a nonabrasive cleaner.
Potential for permanent damage to the glass surface
• Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can
cause pitting of the surface of your cooktop. This is not covered under the
warranty. You should clean the spill while it is still hot. Take special care when
removing hot substances. Refer to the following section.
• When using a scraper, be sure it is new and the razor blade is still sharp. Do not
use a dull or nicked blade.
Cleaning sugary spills and melted plastic
1
. Turn off all surface units. Remove hot pans.
2
. Wearing an oven mitt, use a single-edge razor-blade scraper to move the spill to
a cool area of the cooktop. Remove the spill with paper towels.
3
. Any remaining spillover should be left until the surface of the cooktop has
cooled.
4
. Don’t use the surface units again until all of the residue has been completely
removed.
If pitting or indentations in the glass surface have already occurred, the
cooktop glass will have to be replaced. In this case, service will be necessary.
English - 79
07
MAINT
AINING Y
OUR APPLIANCE
Summary of Contents for NE58H9970WS/AA
