- Operating Instructions -
4 – 5
1
To use the face-up paper path, press the Exit Cover tab towards the rear of the
printer.
2
If the printer is still processing a page, wait until it stops.
Inserting a sheet while printing a page may cause a jam.
3
Gently insert the paper face-up into the Manual Feed slot. Align it against the left
side of the slot.
4
If the machine begins to pull in the sheet, allow it to go in, or a jam may result.
If a jam occurs, open the cover to remove the jammed paper, close the cover, and
try again.
5
Let the trailing end of the paper rest on the table. Within the application, send the
job to the printer. After a moment, the printer prints the page.
6
If necessary, close the Exit Cover to use the face-down paper path for the next
print job.
Setting Up the Printer
The Manual (face-up) Feed Slot
Exit Cover Tab
ML-85G IB(SSA) 2/9/99 11:15 AM Page 4-5
