Samsung HP-R5052, Service Manual

Page: 22 / 128

Alignment & Adjustment
3-2 Samsung Electronics
3-2 How to Access Service Mode
■
Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote buttons in this order; MUTE-1-8-2- POWER ON to turn the set on.
3. The set turns on and enters service mode.
4. Press the Power button to exit and store data in memory.
※
If you fail to enter service mode, repeat steps 1 and 2 above.
5. Initial SERVICE MODE DISPLAY State
※
"T-STRANUS0S-0036" and "T-STRANUS5-0117" are firmware version.
The firmware version is subject to change without notice.
6. Buttons operations within Service Mode
MENU Full Menu Display / Move to Parent Menu
Direction keys
▲
/
▼
Item Selection by Moving the Cursor
Direction keys
◀
/
▶
Data Increase/Decrease for the Selected Item
Source Cycles through the active input source that are connected to the unit
HDMI/DTV HD
Calibration Adjust
Option Byte Test Pattern
White Balance Chip Debugger
SVP-EX Checksum
MST9883 Option PDP
MSP34XX RESET
YC Delay
DNIe Lite
T-STRANUS0S-0036 Jan 12 2005
T-STRANUS5-0117 [Sec : 29]