SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 42 of 280
DCS & DX I&M
August 2001
MMC 200:
Open Customer Programming
DESCRIPTION:
Used to open and close customer level programming. If programming is not opened and an attempt is made
to access a system MMC, the error message [NOT PERMIT] will be displayed.
A four digit passcode is required to access this MMC. Each digit can be 0-9. When opened, this MMC
enables access to all MMCs allowed in MMC 802 Customer Access MMC Number.
PROGRAM KEYS
UP & DOWN
Select open or closed
KEYPAD
Used to enter passcode
SPK
Save data and advance to next MMC
TRSF
Exit Programming
ACTION
DISPLAY
1.
Press TRSF 200
ENABLE CUS. PROG.
Display shows
PASSCODE : _
2.
Enter passcode
ENABLE CUS. PROG.
PASSCODE :
∗
∗
∗
∗
Correct code shows
ENABLE CUS. PROG.
DISABLE
Incorrect code shows
ENABLE CUS. PROG.
PASSWORD ERROR
3.
Press UP or DOWN arrow key to
ENABLE CUS. PROG.
select ENABLE or DISABLE and
ENABLE
Press RIGHT soft key
OR
Dial 1 for ENABLE, dial 0 for DISABLE
4.
Press SPK to advance to MMC entry level
212: ALARM RING
and
SELECT PROG. ID
press UP or DOWN key to select MMC
OR
Enter MMC number and press RIGHT soft
key to enter MMC.
5.
To log out press TRSF key.
DEFAULT DATA:
CLOSED
RELATED ITEMS:
MMC 201 CHANGE CUSTOMER PASSCODE
MMC 802 CUSTOMER ACCESS MMC NUMBER
