SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 113 of 287
Updated I&M
May 2002
MMC 415:
Report Trunk Abandon Data
DESCRIPTION:
Allows the system administrator or technician to enable or disable the reporting of abandoned CO calls for
which CLIP information has been collected on a per trunk basis.
There are two options for this MMC as follows.
0 REPORT : NO
Abandoned call records for incoming calls with CLIP information will not be printed on
the SMDR or stored in the system call abandon list.
These records will continue to be stored in the station review list.
1 REPORT : YES
Abandoned call records for incoming calls with CLIP information will be printed on the
SMDR or stored in the system call abandon list.
These records will also to be stored in the station review list.
Note :
In order for abandoned call records to be printed on SMDR, MMC 725 SMDR Options, Option 11 Print
Abandoned Call Records must be set to YES.
ACTION
DISPLAY
1
Press TRSF 415
[701]
TRK ABNDN
Display shows
REPORT : YES
2.
Dial TRUNK number
[704]
TRK ABNDN
OR
REPORT : YES
Press UP or DOWN to select trunk and use
left or right soft key to move cursor
3.
Dial 1 for YES OR Dial 0 for NO
[704]
TRK ABNDN
OR
REPORT : NO
Press UP or DOWN to scroll through options
and use left or right soft key to
return to step 2
4.
Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA : All TRUNKS will not report data
RELATED ITEMS:
MMC 119 CLIP DISPLAY
MMC 312 ALLOW CLIP
MMC 608 ASSIGN REVIEW BLOCK
MMC 722 STATION KEY PROGRAMMING
MMC 723 SYSTEM KEY PROGRAMMING
MMC 725 SMDR OPTIONS
MMC 728 CLIP TRANSLATION TABLE
