SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 130 of 287
Updated I&M
May 2002
MMC 428:
Trunk/Trunk
Applicable to all versions of the DCS 70 and DCS 24 software and to DCS version 6 software. Not
applicable to DX408.
DESCRIPTION:
Assigns which trunks can be used for outgoing calls in the case of DISA out calls or Trunk to Trunk transfer
call from specific trunks on a per trunk basis. This is useful in the case of having many companies on one
system.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPK
Used to store data and advance to next MMC
HOLD
Used to clear previous entry
ANS/RLS
Used to select ALL
ACTION
DISPLAY
1
Press TRSF 428
[701]
USE
[701]
Display shows
DIAL : YES
2.
Dial the Trunk number ( eg., 705)
[705]
USE
[701]
OR
DIAL : YES
Press UP or DOWN key to select station and
press RIGHT soft key to advance to step 3
3.
Dial the trunk ID number ( eg., 704)
[705]
USE
[704]
OR
DIAL : YES
Press UP or DOWN key to select trunk and
press RIGHT soft key to advance to step 4
4.
Press UP or DOWN key to select YES/NO
[705]
USE
[704]
option
DIAL : NO
OR
Dial 1 for YES or 0 for NO and press RIGHT
soft key to move cursor to ANS option
Press UP or DOWN key to select YES/NO
[705]
USE
[704]
option
DIAL : NO
OR
Dial 1 for YES or 0 for NO and press
RIGHT soft key to return to step 2
5.
Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA:
DIAL = Yes
