SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 231 of 287
Updated I&M
May 2002
MMC 726:
VM/AA Options
DESCRIPTION:
Provides a flexible means of setting in band signalling for voice mail or auto attendant parameters. There are
eight main options for programming and several sub-options to customise the application. Main options are
listed in bold type with the sub-options listed in normal type. Simple YES/NO, numeric and alpha characters
are the requirements needed for the setting of VM/AA.
The following options may be selected for VMAA operation:
In band signalling OPTIONS LIST 0-7
0.
EXT FOR DN1
DTMF information for the station that called the VM/AA port station
that is forwarded to VM/AA port.
1.
TRK FOR DN1
DTMF information for the trunk that called the VM/AA port.
2.
EXT FOR DN2
DTMF information for the station that originated the call to a station
that is forwarded to a VM/AA port.
3.
TRK FOR DN2
DTMF information for the trunk that called a station forwarded to a
VM/AA port.
4.
SEPARATOR
In cases where DN2 is used, this specific digit is sent between the
DN1 and the DN2 information. Both DN1, DN2 must be set to YES for
SEPARATOR to be sent.
5.
DISCONNECT
SIGNAL
This signal is sent when the calling station or CO line hangs up.
6.
CALL TYPE ID
Under this VM/AA option is several customising applications.
0. DIRECT CALL
A call originating directly from another station in the system.
1. ALL FWD CALL
This indicates that a call was forwarded to the VM/AA port from a
station with CALL FORWARD ALL set.
2. BSY FWD CALL
This indicates that a call was forwarded to the VM/AA port from a
station with CALL FORWARD BUSY set.
3. NOA FWD CALL
This indicates that a call was forwarded to the VM/AA port from a
station with CALL FORWARD NO ANSWER set.
4. RECALL
A call is recalling the VM/AA port after being transferred and not
answered.
5. DIR TRK CALL
A CO call has gone directly to VM/AA (eg., trunk 717 DIL to VM/AA).
6. OVERFLOW
A call has OVERFLOWED to the VM/AA port from a station group.
7. DID CALL
A DID call has called the VM/AA port.
8. MESSAGE CALL
A message button or message reply feature code has been used to
call the VM/AA port.
7.
CALL PROGRESS
DTMF digits can be sent in place of normal system TONES. Digits can
be assigned to the following tones:
