SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 191 of 287
Updated I&M
May 2002
MMC 710:
LCR Digit Table
DESCRIPTION:
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing call placement. this table
works in conjunction with LCR ROUTE TABLE, LCR TIME TABLE and LCR MODIFY DIGITS TABLE. There
is a maximum of 500 entries with a digit string length of ten numerical digits. The system will automatically
maintain entered digit strings in numerical order. The characters
∗
and # are also accepted, for use with
feature codes.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPK
Used to store data and advance to next MMC
HOLD
Used to clear previous entry
ACTION
DISPLAY
1.
Press TRSF 710
LCR DIGIT
(001)
Display shows
DIGIT:
2.
Dial LCR entry (eg 005)
LCR DIGIT
(005)
OR
DIGIT: _
Press UP or DOWN key to select entry
and press RIGHT soft key to move cursor
3.
Enter LCR digit string via the dial key pad
LCR DIGIT
(005)
and Press RIGHT soft key
DIGIT: 305426
OR
Press LEFT soft key to return to step 1
4.
Enter digit length (00 - 31)
LCR DIGIT
(005)
Cursor will move to RT
LENGTH : 10
RT : 01
Enter route selection (1-16)
OR
Press LEFT soft key to return to length
value. Valid entry will return you to step 1
5
Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
