SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 173 of 287
Updated I&M
May 2002
MMC 701:
Assign COS Contents
DESCRIPTION:
MMC 701 is similar to MMC 700 but does not allow a copy command. Primarily used for the creation of a new
class of service. If the feature of un-supervised conference is allowed, a programmed CONF key must be
available to allow re-entry into conference call.
The DCS, DCS 70 and DCS Compact systems have thirty (30) Classes of Service (COS). The DCS 24 has
ten (10) Classes of Service. The DX408 has 4 Classes of Service.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPK
Used to store data and advance to next MMC
“F” Key
Used to toggle back to MMC 700
TOLL LEVEL OPTIONS
DIAL DIGIT
TOLL LEVEL
0
A
1
B
2
C
3
D
4
E
5
F
6
G
7
H
ACTION
DISPLAY
1.
Press TRSF 701
COS CONTENTS (01)
Display shows
TOLL LEVEL : A
2.
Dial in COS 01-30 (eg., 06)
COS CONTENTS (06)
OR
TOLL LEVEL : A
Press UP or Down Key to select COS and
press RIGHT soft key to move cursor to toll
level
3.
Dial toll level (eg., 2 - see above list)
COS CONTENTS (06)
OR
TOLL LEVEL : C
Press UP or DOWN key to select new level
of TOLL
OR
Press RIGHT soft key to advance to COS
options
4.
Dial in COS option (eg., 09 - see option list)
COS CONTENTS (06)
OR
09 : DND : YES
Press UP or DOWN key to select option and
press
RIGHT soft key to move cursor
