SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 14 of 280
DCS & DX I&M
August 2001
MMC 103:
Set Answer Mode
DESCRIPTION:
Allows a system administrator to change the answer mode of any keyset or add-on module. Each keyset or
add-on module can have its answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by pressing the
ANS/RLS key or by lifting the handset.
1. AUTO: After giving a short attention tone, the keyset will automatically answer calls on the speaker phone.
When a CO line is transferred to a keyset in Auto Answer, the screened portion of the call will be Auto
Answer, but the keyset or add-on module (AOM) will ring when the transfer is made if the user has not
pressed the ANS/RLS key or lifted the handset.
2. VOICE: ANNOUNCE after a short attention tone, callers can make an announcement but the ANS/RLS
key or handset must be used to answer calls.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPK
Used to store data and advance to next MMC
HOLD
Used to clear previous entry
ANS/RLS
Used to select ALL
ACTION
DISPLAY
1.
Press TRSF 103
[201] ANS MODE
Display shows
RING MODE
2.
Dial keyset number (eg., 205)
[205] ANS MODE
OR
RING MODE
Press UP or DOWN to select keyset
OR
Press ANS/RLS to select all Stations
[ALL] ANS MODE
Press RIGHT soft key to move cursor
?
3.
Dial 0, 1 or 2 to change ring mode
[205] ANS MODE
OR
VOICE ANNOUNCE
Press UP or DOWN to select ring mode and
press RIGHT soft key to return to step 2
above
4.
Press TRSF to store and exit
OR
Press SPK to store and advance
to next MMC
DEFAULT DATA:
ALL KEYSETS RING
RING FREQUENCY DEFAULT IS 5
RELATED ITEMS: MMC 111 KEYSET RING TONE
