SAMSUNG DCS
PROGRAMMING
TECHNICAL MANUAL
SECTION
Page 232 of 287
Updated I&M
May 2002
TONES
VALUE
0. DIAL TONE
BA
1. BUSY TONE
4
2. RINGBACK TONE
5
3. DND NO MORE
6
4. HDSET ANSWER
3
5. SPKER ANSWER
2
NOTE: Default data of call progress tones will automatically cleared once if the SMDI VMS SET (MMC 210)
is turned on.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPK
Used to store data and advance to next MMC
HOLD
Used in some fields where a value is entered or deleted.
A
Used to input alpha character “A“
B
Used to insert alpha character “B“
C
Used to insert alpha character “C“
ACTION
DISPLAY
1.
Press TRSF 726
EXT FOR DN1
Display shows
YES
2.
Enter the OPTION number from above list
SEPARATOR
(eg., 4)
NO
OR
Press UP or DOWN key to make selection
Press LEFT soft key to move cursor
3.
Enter 1 for YES or 0 for NO
SEPARATOR
OR
NO
Press UP or DOWN key for selection
Press RIGHT soft key to return to step 2
4.
If option 0 is selected at step 2
EXT FOR DN1
YES
5.
If option 1 is selected at step 2
TRK FOR DN1
YES
6.
If option 2 is selected at step 2
EXT FOR DN2
NO
7.
If option 3 is selected at step 2
TRK FOR DN2
NO
8.
If option 4 is selected at step 2
SEPARATOR
(A valid entry consists of digits 0-9 or alpha
NO
characters A-C)