Samlexpower Evolution Series Owner'S Manual Download Page 8

Page: 8 / 92

8 | SAMLEX AMERICA INC.

SECTION 3 |

Operation

3.0 GENERAL INFORMATION

EVO-RC-PLUS Remote Control provides the user with the ability to monitor the operation and
also to modify EVO

Inverter/Charger’s operating parameters. The default settings in EVO

Inverter/Charger are adequate for some installations but may have to be modified for others.
This Section provides details on the remote functions, status and menu maps and displays, fault
messages and parameter settings.

3.1 NAVIGATING THE REMOTE

Please refer to the layout at Fig. 1.1.

•

LCD Display (1)

– The 4-line (20 characters each) LCD display shows status and information

for the EVO

Inverter/Charger. All Setup Menus and faults also appear on the LCD display.

•

ON/OFF Key (2)

– The On/Off Key is used for switching on/ switching off the EVO

Inverter/Charger and also to enter/exit Standby Mode.

•

Navigation Keys (5, 6, 7, 8)

– These four keys allow simple access to Menu Item that

assists configuring, monitoring, and troubleshooting the EVO

Inverter/Charger.

Navigation Key Functions



Back

– Return to previous selection



– Move from lower to upper Menu Screen in various Menu Maps e.g. Fig 3.1 (a)



Down

– Move from upper to lower Menu Screen in various Menu Maps

e.g. Fig 3.1(a)



Enter

– Select/write a particular value or option.

•

Status

– Blue LED indicator for indicating operating status (see details at Section 6, Table 6.1).

•

Fault

– Red LED indicator for indicating fault conditions (see details at Section 6, Table 6.1).

•

SD Card slot

– This slot supports SD memory card (up to 16GB, FAT16/32). The SD Card

is used for data logging of EVO

Inverter/Charger’s operational statistics and events and

saving and uploading of programmed parameters. See Section 5: SD Card.

Summary of Contents for Evolution Series





























































































Search results

Summary of Contents for Evolution Series

Reviews:

Related manuals for Evolution Series

Brands by name

Popular brands

Samlexpower Evolution Series, Owner'S Manual

Search results

Summary of Contents for Evolution Series

Reviews:

Related manuals for Evolution Series

Brands by name

Popular brands